What is Lithofin Cotto Easy-Clean?
Lithofin Cotto Easy-Clean is a concentrated cleaning and maintenance product, specially developed for floors made of Cotto, terracotta, clay tiles, Terres Cuites, and ceramic pavers. This product from the Lithofin range is based on natural soaps and contains powerful re-fattening components that effectively dissolve dirt, which can then be removed with the cleaning water. Lithofin Cotto Easy-Clean does not leave layers behind but contains care components that gradually create a beautiful patina, making the surface less sensitive. With regular use, the floor becomes richer in color and structure. It has a fresh, lemon-like fragrance and is suitable for both indoor and outdoor use.
How does Lithofin Cotto Easy-Clean work?
The product works through surfactants that loosen dirt so it can be easily taken up by the cleaning water. Special care components that remain on the surface make the next cleaning easier and support the formation of patina. For use, add Lithofin Cotto Easy-Clean to a bucket of clean water (preferably lukewarm), at a dosage of about 20–30 ml per 10 liters of water. For stubborn dirt, a slightly higher dosage can be used. There is no need to rinse, which saves time and keeps the floor’s natural look intact.
Benefits and Properties
Thanks to the natural soaps and re-fattening components, the floor is protected and less prone to soiling. The product is biodegradable according to current environmental standards and can be used regularly without damaging the surface or affecting protective layers.
Directions for Use
Add one splash of Lithofin Cotto Easy-Clean (approx. 20–30 ml) to 10 liters of clean, lukewarm water. Mop the floor and let the slightly damp film dry without rinsing. For more intensive cleaning, increase the concentration. Do not use undiluted or on rough, unfinished wood. For an occasional extra sheen, Lithofin Cotto Gloss-Milk can be added to the water instead of Easy-Clean.
Maintenance Advice
Store Lithofin Cotto Easy-Clean in a cool, closed container and avoid temperatures above 25°C. Shelf life: up to 5 years in original packaging. The product is biodegradable, and the empty container can be recycled. Avoid contact with eyes; in case of contact, rinse thoroughly with water and seek medical advice if irritation persists.
FAQs
What is Lithofin Cotto Easy-Clean and what is it used for?
It is a concentrated cleaning and maintenance product based on natural soaps, specially developed for Cotto and terracotta floors. It cleans effectively while leaving behind care components that make future cleaning easier and promote patina formation.
Which surfaces is Lithofin Cotto Easy-Clean suitable for?
For regular maintenance cleaning of Cotto, terracotta, clay tiles, Terres Cuites, ceramic pavers, and similar surfaces, both indoors and outdoors.
How is Lithofin Cotto Easy-Clean used?
Add 20–30 ml per 10 liters of lukewarm water. Mop and allow the slightly damp film to dry without rinsing.
How often should Lithofin Cotto Easy-Clean be used?
As often as required for regular cleaning. For extra gloss, alternate with Lithofin Cotto Gloss-Milk.
Can Lithofin Cotto Easy-Clean be used undiluted?
No, always dilute with water. Undiluted use is not recommended.
How should Lithofin Cotto Easy-Clean be stored?
In a cool, closed place, below 25°C. Shelf life approx. 5 years in original packaging.
Is Lithofin Cotto Easy-Clean environmentally friendly?
Yes, the surfactants are biodegradable according to EC Regulation 648/2004. The packaging is recyclable.
What are the safety instructions?
Causes serious eye irritation. Wear eye protection and keep out of reach of children. In case of contact with eyes, rinse with water and seek medical advice if irritation persists.
In what packaging is it available?
Lithofin Cotto Easy-Clean is available in 1-liter bottles with childproof closure and 5-liter containers.