Product description
Lithofin MN Stain Remover
Lithofin MN Stain Remover removes oil, grease, and gloss layers from marble and natural stone. The product is environmentally friendly and suitable for both indoor and outdoor use.
✓ Suitable for cement tiles, terracotta, terrazzo, marble, and natural stone
✓ Removes oil, grease, gloss layers, and light cement residue
✓ Mildly alkaline and solvent-free
✓ Biodegradable and environmentally friendly
✓ Suitable for polished, honed, and rough surfaces
What is Lithofin MN Stain Remover?
Lithofin MN Stain Remover is a mildly alkaline cleaning agent without solvents, specially developed for marble and natural stone. Part of the Lithofin MN product line, it is also suitable for cement tiles, terracotta, and terrazzo. The formula combines dissolving and cleaning components and is ideal for removing oil, grease, gloss layers, floor maintenance residues, and light cement residue. It can be used both indoors and outdoors on surfaces such as marble, natural stone, concrete stone, and engineered stone like quartz composite.
How the Product Works
The stain remover loosens contaminants from the surface. Depending on the level of soiling, it is applied pure or diluted with up to ten parts water. Spread the product evenly, scrub if necessary, and let it work for 10–20 minutes without drying out. Then rinse thoroughly with plenty of water. For stubborn dirt, the treatment can be repeated on a dry surface with a higher concentration and longer dwell time.
Benefits and Properties
• Mildly alkaline and solvent-free, safe for various surfaces
• Fully water-soluble and biodegradable (in accordance with Regulation (EC) No. 648/2004)
• Density: approx. 1.0 g/cm³
• pH value (concentrate): approx. 10
• Neutral odor
• Effective against oil, grease, gloss layers, and light cement residue
Maintenance and Advice
• Store sealed, cool, frost-free, and below 25°C
• Shelf life: approx. 3 years when stored properly
• Wear gloves, protective clothing, and eye protection
• Avoid contact with eyes; in case of contact, rinse immediately with water and seek medical advice
• Avoid contact with sensitive surfaces such as varnished wood and wallpaper
• For stubborn stains: use Lithofin Lösefix
• For cement residue: use Lithofin MN Cement Residue Remover
Highlights
✓ Suitable for marble, natural stone, cement tiles, terracotta, and terrazzo
✓ Removes oil, grease, gloss layers, and light cement residue
✓ Mildly alkaline and solvent-free
✓ Biodegradable and environmentally friendly
✓ For indoor and outdoor applications
Frequently Asked Questions (FAQ)
What is Lithofin MN Stain Remover?
A mildly alkaline, solvent-free cleaning agent for marble, natural stone, cement tiles, terracotta, and terrazzo. Removes oil, grease, gloss layers, maintenance residues, and light cement residue.
How do I use the product?
Depending on the level of dirt, apply pure or diluted (max. 1:10), spread, allow to work for 10–20 minutes, scrub if necessary, and rinse thoroughly with water.
On which surfaces can I use it?
On polished, honed, and rough surfaces of marble, natural stone, concrete stone, and quartz composite, both indoors and outdoors.
How often should I apply it?
For periodic deep cleaning or heavy soiling.
Is it safe for all types of stone?
Yes, for marble, limestone, cement tiles, terracotta, and terrazzo. Always test in an inconspicuous area first.
How much do I need?
Approximately 5–10 m² per liter pure, up to 30 m² per liter when diluted.
How should I store it?
Sealed, cool, frost-free, below 25°C. Shelf life approx. 3 years.
Are there any special safety measures?
Avoid skin and eye contact, wear protective gear, rinse eyes immediately if in contact, and seek medical attention.
What if the product dries on the surface?
Add water, scrub again, and avoid drying during the dwell time.
Directions for Use
- Apply pure or diluted up to 1:10, depending on soiling.
- Spread evenly, scrub if necessary.
- Allow to work for 10–20 minutes, avoiding drying.
- Rinse generously with water, repeat if necessary.
- Add water if drying occurs during application.
- For heavy soiling: use higher concentration on a dry surface.
- Avoid sensitive materials such as varnished wood or acrylic glass.
- Always test in an inconspicuous area.
